Whirlpool Error Codes: Washer, Dryer, Dishwasher & Fridge

Whirlpool builds appliances under its own name and as Maytag, KitchenAid, Amana, and many Kenmore models, so these codes overlap widely across those brands. Most Whirlpool codes take the form F# E# — the F number is the failure system and the E number is the specific fault within it. Find your code below for what it means and the most likely cause; detailed fix pages are linked as they are published.

⚠ Safety first. Unplug the appliance (or switch off its breaker) before touching internal parts. Gas, high-voltage, and sealed refrigerant-system repairs must be done by a licensed professional. If you smell gas or see scorching, stop and call a technician.

Whirlpool washer codes

Code	Meaning	Most likely cause
F21 / F20	Long drain — water not leaving in time	Clogged drain pump filter, kinked or blocked drain hose
F5 E3	Door won’t lock / unlock	Door lock assembly or its wiring
Sud / Sd	Excess suds detected	Too much detergent or non-HE detergent
F8 E1 (LF)	Long fill — not enough water	Water supply off, kinked inlet hose, inlet valve
F7 E1	Motor speed sensor fault	Drive motor or its sensor

Whirlpool dryer codes

Code	Meaning	Most likely cause
F01	Main electronic control board fault	Failed main control board (CCU)
PF	Power failure during a cycle	Interrupted power; restart the cycle
AF	Restricted airflow	Clogged lint filter or blocked vent

Whirlpool dishwasher & oven codes

Code	Appliance	Meaning / likely cause
F8 E4	Dishwasher	Water fill / flow meter fault — supply, inlet valve, or flow meter
F2 E0	Oven / range	Stuck or shorted keypad — control panel membrane
F3 E0	Oven / range	Oven temperature sensor (RTD) open or shorted
Cooling Off / “OFF”	Refrigerator	Demo / showroom mode is on — not a fault; disable in settings

Browse all washer codes, dryer codes, dishwasher codes, and refrigerator codes, or return to the brand index.